• Instant charger on the go for portable device like mobile phone, smartphone, MP3, game device, etc.
• Battery Pack offer integrated mini-USB port and DC supply (AC adapter) selection and offers a 2400~4800mAh battery.
• Supports Up to 2.1A Total Output Current.
• It corresponds to all specifications connectors only has 4P USB Port.
• LED Interface can Indicates Charge status and battery power level.
   

Key Features:

• Single input USB-compliant charger
  • 3.9V-17V input operating voltage range
  • Programmable Input voltage and current limit
  • Up to 2.5A fast charge rate and 6A discharge rate
• Battery boost operation
  • 92% 5.1V boost efficiency @ 1.3A (bq24195L)
  • 90% 5.1V boost efficiency @ 2.1A (bq24195)
• High integration
  • Power path management
  • Synchronous switching MOSFETs
  • Integrated current sensing
• USB host/charging port D+/D- detection
• Charge status output for LED or host processor
• Battery temperature sensing and charging safety timer    

Battery Bank
Input/Output Specification

• Input Voltage:   5Vdc
• Max Charge Current:   1.5A (@Vin  5Vdc)
• Output Voltage:   5Vdc
• Maximum Output Current:   2.1A (@ Vbattery 4.2V)
• Total Power:    10.5W

Product Application (/s)

• Power Bank for Smartphone, Tablet, and Other Portable Devices.
• Charger for portable devices.

Battery Bank Charge Current Curve

Efficiency (%)

Battery Bank Function Block (TI BQ24195)

Power Supply: Buck

• I/P: 120 – 500 VAC
• O/P: 200mA
• Surge: 6KV

Mechanical:

Dimensions: 65 mmx 32mm x 22mm

Key Components:

1. LNK306PN/PI - 1 No.
2. Air coil: EE1306 - 1 No.
3. MosFET: FQP2N60C/Fairchild – 1 No.
4. Zener TVS: P6KE150A/Fairchild – 3 No.
5. PCB: GE, SS

An integrated power measurement device which combines two ΔΣ analog-to-digital converters, power calculation engine, energy-to-frequency converter, and a serial interface on a single chip.

It can accurately measure instantaneous current and voltage, and calculate VRMS, IRMS, instantaneous power, apparent power, active power, and reactive power for single-phase, 2- or 3-wire power metering applications.

The CS5463 is optimized to interface to shunt resistors or current transformers for current measurement, and to resistive dividers or potential transformers for voltage measurement.

The CS5463 features a bi-directional serial interface for communication with a processor and a programmable energy-to-pulse output function.

Additional features include on-chip functionality to facilitate system-level calibration, temperature sensor, voltage sag detection, and phase compensation.

Features

• Energy Data Linearity: ±0.1% of Reading over 1000:1 Dynamic Range
• On-chip Functions:
  • Instantaneous Voltage, Current, and Power
  • IRMS and VRMS, Apparent, Reactive, and Active (Real) Power
  • Active Fundamental and Harmonic Power
  • Reactive Fundamental, Power Factor, and Line Frequency
  • Energy-to-pulse Conversion
  • System Calibrations and Phase Compensation
  • Temperature Sensor
• Meets accuracy spec for IEC, ANSI, JIS.
• Low Power Consumption
• Current Input Optimized for Sense Resistor.
• Power Supply Monitor
• Simple Three-wire Digital Serial Interface
• “Auto-boot” Mode from Serial E2PROM

 Block Diagram

Test Report

 Email us at :  fae.kumar@amarelectronics,sales@amarelectronics.com